================================================================================
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
================================================================================

            ====================================================
            Building The Apache Tomcat 10.1 Servlet/JSP Container
            ====================================================

This project contains the source code for Tomcat 10.1, a container that
implements the Jakarta Servlet 6.0, JSP 3.1, EL 5.0, WebSocket 2.1 and
Authentication 3.0 specifications from the Jakarta EE project at Eclipse
<https://jakarta.ee//>.

Note: If you just need to run Apache Tomcat, it is not necessary to build
it. You may simply download a binary distribution. It is cross-platform.
Read RUNNING.txt for the instruction on how to run it.

In order to build a binary distribution version of Apache Tomcat from a
source distribution, do the following:


(1) Download and Install a Java Development Kit

 1. If the JDK is already installed, skip to (2).

 2. Download a version 17 or later of Java Development Kit (JDK) release (use
    the latest update available for your chosen version) from one of:

        http://www.oracle.com/technetwork/java/javase/downloads/index.html
        http://openjdk.java.net/install/index.html
        or another JDK vendor.

    Note regarding later versions of Java:

      As documented elsewhere, one of components in Apache Tomcat includes
      a private copy of the Apache Commons DBCP 2 library.

      The JDBC interfaces implemented by DBCP frequently change in non-backwards
      compatible ways between versions of the Java SE specification. Therefore,
      it is likely that DBCP 2 will only compile with the specific version of Java
      listed above and that compilation will fail if a later version of Java is
      used.

      See Apache Commons DBCP 2 project website for more details on
      available versions of the library and its requirements,

        https://commons.apache.org/dbcp/

 3. Install the JDK according to the instructions included with the release.

 4. Set an environment variable JAVA_HOME to the pathname of the directory
    into which you installed the JDK release.


(2) Install Apache Ant version 1.10.2 or later on your computer.

 1. If Apache Ant version 1.10.2 or later is already installed on your
    computer, skip to (3).

 2. Download a binary distribution of Ant from:

        https://ant.apache.org/bindownload.cgi

 3. Unpack the binary distribution into a convenient location so that the
    Ant release resides in its own directory (conventionally named
    "apache-ant-[version]").

    For the purposes of the remainder of this document, the symbolic name
    "${ant.home}" is used to refer to the full pathname of the release
    directory.

 4. Create an ANT_HOME environment variable to point the directory
    ${ant.home}.

 5. Modify the PATH environment variable to include the directory
    ${ant.home}/bin in its list.  This makes the "ant" command line script
    available, which will be used to actually perform the build.


(3) Building Tomcat 10.1

(3.1) Checkout or obtain the source code for Tomcat 10.1

Clone the source using git, then checkout a specific major branch or
main for the latest code development, or download and unpack a source
package.

 *  Tomcat GitHub repository URL:

        https://github.com/apache/tomcat

 *  Source packages can be downloaded from:

        https://tomcat.apache.org/download-10.cgi

The location where the source has been placed will be further referred as
${tomcat.source}.

The Tomcat local build process does not modify line-endings. The svn repository
is configured so that all files will be checked out with the line-ending
appropriate for the current platform. When using a source package you should
ensure that you use the source package that has the appropriate line-ending
for your platform:

  zip    -> CRLF
  tar.gz -> LF

Note that the release build process does modify line-endings to ensure that
each release package has the appropriate line-endings.

(3.2) Building

 1. The build is controlled by creating a ${tomcat.source}/build.properties
    file.

    It is recommended to always create the file, because of unfortunate
    default value of base.path property. You may start with the following
    content for the file:

        # ----- Default Base Path for Dependent Packages -----
        # Replace this path with the directory path where dependencies binaries
        # should be downloaded
        base.path=/home/me/some-place-to-download-to

 2. Configure base.path property by adding it to the
    ${tomcat.source}/build.properties file.

    The base.path property specifies the place where Tomcat dependencies
    required by the build are downloaded. It is recommended to place this
    directory outside the source tree, so that you do not waste your
    time re-downloading the libraries.

* NOTE: The default value of the base.path property configures the build script
  to download the libraries required to build Tomcat to the
  ${user.home}/tomcat-build-libs directory.

* NOTE: Users accessing the Internet through a proxy must use the properties
  file to indicate to Ant the proxy configuration.

  The following properties should be added to the ${tomcat.source}/build.properties
  file.

        proxy.use=true
        proxy.host=proxy.domain
        proxy.port=8080
        proxy.user=username
        proxy.password=password

  See Apache Ant documentation for the <setproxy> task for details.

 3. Go to the sources directory and run Ant:

        cd ${tomcat.source}
        ant

    This will execute the "deploy" target in build.xml.

    Once the build has completed successfully, a usable Tomcat installation
    will have been produced in the ${tomcat.source}/output/build directory,
    and can be started and stopped with the usual scripts.

    Note that the build includes Tomcat documentation, which can be found
    in the output/build/webapps/docs directory.

    The path of the output directory can be controlled by specifying the
    "tomcat.output" property in the build.properties file.

* NOTE: Do not run the build as the root user. Building and running Tomcat
  does not require root privileges.


(4) Updating sources and rebuilding

It is recommended that you regularly update the downloaded Tomcat 10.1
sources using your git client.

For a quick rebuild of only modified code you can use:

    cd ${tomcat.source}
    ant


(5) Special builds

There are several targets in Tomcat build files that are useful to be
called separately. They build components that you may want to build
quickly, or ones that are included in the full release and are not built
during the default "deploy" build.

(5.1) Building documentation

The documentation web application is built during the default "deploy"
build.

It can be built quickly by using the following commands:

    cd ${tomcat.source}
    ant build-docs

The output of this command will be found in the following directory:

    output/build/webapps/docs


The API documentation (Javadoc) is built during a "release" build. It is
easy to build it separately by using the following commands:

    cd ${tomcat.source}
    ant javadoc

The output of this command will be found in the following directories:

    output/dist/webapps/docs/api
    output/dist/webapps/docs/elapi
    output/dist/webapps/docs/jspapi
    output/dist/webapps/docs/servletapi


(5.2) Building the extras (commons-logging, webservices etc.)

These components are documented on the "Additional Components"
(extras.html) page of documentation. They are built during a "release"
build.

You can build them by using the following commands:

    cd ${tomcat.source}
    ant extras

(5.3) Building the embedded packages

These are built during a "release" build.

You can build them by using the following commands:

    cd ${tomcat.source}
    ant embed

(5.4) Building the Windows installer

The Windows installer uses the NSIS installer framework.
It can be built on Windows, on any other platform which provides
the Wine Windows emulator or the NSIS binary "makensis".

Linux and macOS are platforms, on which you can install Wine or
"makensis".

Selecting between Wine and makensis on non-Windows platforms can
be done by setting the ant property "nsis.tool" to either "wine"
or "makensis" in build.properties.

If you want to sign the installer, you will need to set some
properties with names prefixed with "codesigning" in your build.properties.
For details see the targets "jsign-installer" and "jsign-uninstaller"
in build.xml and the default property values in build.properties.default.


(6) Building a full release (as provided via the ASF download pages)

 1. Remark on building the Windows installer

    A full release includes the Windows installer which requires a Windows
    environment, an installed Wine emulator or an installed native
    "makensis" binary from the NSIS project. Creating a reproducible
    installer using the "makensis" option needs a special build of "makensis".
    For details see below.

    Provided that Wine or "makensis" is available on non-Windows platforms,
    a full release build may be made on Windows, Linux or macOS.

    If you do not want to build the Windows installer, the skip.installer
    property may be set to skip the creation of the Windows installer.

 2. Configure GPG, if needed

    If the released artifacts have to be cryptographically signed with a
    PGP signature, like the official ASF releases are, the following
    property can be added to the build.properties file:

        # Location of GPG executable (used only for releases)
        gpg.exec=/path/to/gpg

    You will be prompted for the GPG passphrase when the release build
    starts, unless "gpg.passphrase" property is set.

    The ant target "verify-release" also uses the property "gpg.exec" to
    call the GPG executable. If you want to use "verify-release" but you
    do not want to sign the release artefacts, set "gpg.exec" and also
    "gpg.sign.files=false".


 3. If building the Windows installer on Windows

    If running the build in a UAC enabled environment, building the Windows
    installer requires elevated privileges. The simplest way to do this is to
    open the command prompt used for the build with the "Run as administrator"
    option.

 4. Configure the code signing service

    ASF committers performing official releases will need to configure the code
    signing service so that the Windows installer is signed during the build
    process. The following properties need to be added to the build.properties
    file:

        # Location of GPG executable (used only for releases)
        gpg.exec=/path/to/gpg
        # Code signing of Windows installer
        do.codesigning=true
        codesigning.storepass=request-via-pmc
        codesigning.keypass=request-via-pmc

    Release managers will be provided with the necessary credentials by the PMC.

    If you want to verify the installer from a release by rebuilding it,
    you can use the detached signatures provided in the official releases.
    In this case you have to use the sources from the source release
    archive, which contains these signatures. You also have to build
    on Windows, use Wine, or use a special build of makensis to create
    a reproducible installer, that fits the signature files.

 5. Using a special "makensis" build on non-Windows (optional)

    If you want to build a reproducible installer on non-Windows
    by using "makensis" instead of "Wine", you need to build
    "makensis" from a source download yourself. To build "makensis",
    you need python, scons and a C compiler. You can build "makensis"
    via an Ant target:

    ant local-makensis

    or you can build it manually using the following recipe.

    First detect the needed version by looking for nsis.version
    in build.properties.default.

    Download and extract NSIS for Windows by running "ant download-dist". Note
    the NSIS installation path from the output or by checking "nsis.bin.home" in
    build.properties.default. For example by default:
    nsis.bin.home=${base.path}/nsis-${nsis.version}

    The corresponding sources will be downloaded to "nsis.src.home" in
    build.properties.default. For example by default:
    nsis.src.home=${base.path}/nsis-${nsis.version}-src

    Install the scons Python software construction tool.

    Run the following command in the extracted NSIS source directory:

        scons UNICODE=yes PREFIX=${base.path}/nsis-${nsis.version}/Bin SKIPPLUGINS=all SKIPUTILS=all SKIPMISC=all NSIS_CONFIG_CONST_DATA_PATH=no VERSION=${nsis.version} install-compiler

    You need to specify the correct value in VERSION (this ends up in the installer binary
    so it needs to match). The PREFIX is not important, but you need to make sure
    that the created binary "makensis" gets finally put into the "Bin" directory of
    the NSIS binary distribution that "ant download-dist" installed. When using
    "NSIS_CONFIG_CONST_DATA_PATH=no" the binary is independent of the value of "PREFIX".

    In addition, set the ant property "nsis.tool" to "makensis" in
    build.properties.

 6. Build the release:

    Apache Tomcat releases are fully reproducible.

    Release managers producing release builds must follow the following
    procedure:

    cd ${tomcat.source}
    ant pre-release
    ant release
    git commit -a -m "Tag <version-number>"
    git tag <vesion-number>
    git push origin <version-number>
    ant release
    git reset --hard HEAD~1

    The output from either 'ant release' call may be uploaded as the official
    release since they will be identical. It is recommended that the output from
    the second call is used.

    Anyone wishing to reproduce an official build must do so from an official
    source release. The build tool chain defined in build.properties.release
    must be used to reproduce an official build. Once unpacked to
    ${tomcat.source}, the following steps must be followed

    cd ${tomcat.source}
    ant release

    Following the same steps without using the defined build tool chain will
    create a release that is functionally the same as an official release but
    not bit for bit identical.


(7) Tests

(7.1) Running Tomcat tests

Tomcat includes a number of junit tests. The tests are not run when a
release is built. There is separate command to run them.

To run the testsuite use the following command:

    cd ${tomcat.source}
    ant test

It is advisable to redirect output of the above command to a file for later
inspection.

The JUnit reports generated by the tests will be written to the following
directory:

    output/build/logs

By default the testsuite is run twice to test the 2 different implementations
of Tomcat connectors: NIO and NIO2. (If you are not familiar with Tomcat
connectors, see config/http.html in documentation for details).

The 2 runs are activated and deactivated individually by the following
properties, which all are "true" by default:

    execute.test.nio=true
    execute.test.nio2=true

The SSL tests will be run twice. Once with the JSSE implementation and once
with the OpenSSL implementation. The OpenSSL implementation can only be
tested if Tomcat-Native library binaries are found by the testsuite. The
"test.apr.loc" property specifies the directory where the library binaries are
located.

By default the "test.apr.loc" property specifies the following location:

    output/build/bin/

If you are on Windows and want to test the OpenSSL TLS implementation you can
put the tcnative-2.dll file into ${tomcat.source}/bin/ and it will be
copied into the above directory when the build runs.

The unit tests include tests of the clustering functionality which require
multicast to be enabled. There is a simple application provided in the Tomcat
test source (org.apache.catalina.tribes.TesterMulticast) that can be used to
check if a machine supports multicast. Notes on enabling multicast for different
operating systems are provided in the Javadoc for that class.


(7.2) Running a single test

It is possible to run a single JUnit test class by adding the "test.entry"
property to the build.properties file. The property specifies the name of
the test class.

For example:

    test.entry=org.apache.catalina.util.TestServerInfo

It is possible to further limit such run to a number of selected test
methods by adding "test.entry.methods" property. The property specifies a
comma-separated list of test case methods.

For example:

    test.entry=org.apache.el.lang.TestELArithmetic
    test.entry.methods=testMultiply01,testMultiply02


(7.3) Running a set of tests

It is possible to run a set of JUnit test classes by adding the "test.name"
property to the build.properties file. The property specifies an Ant
includes pattern for the fileset of test class files to run.

The default value is "**/Test*.java", so all test classes are being
executed (with few exceptions - see build.xml for several exclude patterns).

You can include multiple patterns by concatenating them with a comma (",")
as the separator.

For example:

    test.name=**/TestSsl.java,**/TestWebSocketFrameClientSSL.java

You can exclude specific JUnit test classes by adding the "test.exclude"
property to the build.properties file. The property specifies an Ant
excludes pattern for the fileset of test class files to exclude form the run.
The default value is empty, so no classes are excluded. The syntax is the same
as for the property "test.name".


(7.4) Other configuration options

 1. It is possible to configure the directory where JUnit reports are
 written to. It is configured by "test.reports" property. The default
 value is

        output/build/logs

 2. It is possible to enable generation of access log file when the tests
 are run. This is off by default and can be enabled by the following
 property:

        test.accesslog=true

 The "access_log.<date>" file will be written to the same directory as
 JUnit reports,

        output/build/logs

 3. The testsuite respects logging configuration as configured by
 ${tomcat.source}/conf/logging.properties

 The log files will be written to the temporary directory used by the
 tests,

        output/test-tmp/logs

 4. It is possible to configure formatter used by JUnit reports.
 Configuration properties are "junit.formatter.type",
 "junit.formatter.extension" and "junit.formatter.usefile".

 For example the following property deactivates generation of separate report
 files:

        junit.formatter.usefile=false

 5. It is possible to speed up testing by letting JUnit run several
 tests in parallel.

 This is configured by setting "test.threads" property. The recommended
 value is one thread per core.

 6. Test output can be suppressed for cleaner console output, especially useful
 when running tests with multiple threads:

        ant test -Dtest.silent=true

 This suppresses JUnit console output while still saving all test results to
 individual log files in output/build/logs. The test-status target will still
 display a summary of any failures or skipped tests.

 7. Optional support is provided for the Cobertura code coverage tool.

NOTE: Cobertura is licensed under GPL v2 with parts of it being under
      Apache License v1.1. See https://cobertura.github.io/cobertura/ for details.
      Using it during Tomcat build is optional and is off by default.

 Cobertura can be enabled using the following properties:

        test.cobertura=true
        test.threads=1

 Using Cobertura currently requires setting test.threads configuration
 property to the value of 1. Setting that property to a different value
 will deactivate code coverage.

 The report files by default are written to

        output/coverage

 8. The performance tests are written to run on reasonably powerful machines
    (such as a developer may use day to day) assuming no other resource hungry
    processes are running.

    Performance tests may be an absolute test (how long to complete a number
    of iterations of an operation or set of operations) or may be a relative
    test (how long two or more different approaches take to generate the same
    result). The absolute tests may be destructive in that they run until the
    system runs out of resources.

    Where there is no benefit in running an absolute performance test as part
    of a standard test run, the test will be excluded by naming it
    Test*Performance.java.

    The relative tests are included as part of a standard test run however,
    where the assumptions made about host capabilities are  not true (e.g. on
    CI systems running in virtual machine) the tests may be deactivated by
    using the following property:

        test.excludePerformance=true

 9. Some tests are require large heaps (e.g. 8GB). The CI systems used by the
    project either cannot support heaps of this size or do not support them by
    default. These tests are therefore disabled by default and may be enabled by
    using the following property:

        test.includeLargeHeap=true

 10. Some tests include checks that the access log valve entries are as expected.
    These checks include timings. On slower / loaded systems these checks will
    often fail. The checks may be relaxed by using the following property:

        test.relaxTiming=true

 11. It is known that some platforms (e.g. OSX El Capitan) require IPv4 to
     be the default for the multicast tests to work. This is configured by
     the following property:

        java.net.preferIPv4Stack=true

 12. By default, the output of unit tests is sent to the console and can be
     quite verbose. The output can be deactivated by setting the property:

        test.verbose=false

(7.5) Running httpd integration tests

  Tomcat includes integration tests that verify Tomcat's behavior when
  running behind an Apache HTTP Server (httpd) reverse proxy. These tests
  require a working httpd installation and are skipped when httpd is not
  available.

   1. Prerequisites

      An Apache HTTP Server (httpd) installation is required.
      The following httpd modules must be available:

        - mod_proxy
        - mod_proxy_http
        - mod_headers
        - mod_ssl
        - mod_authz_core
        - mod_unixd (Linux and macOS only)
        - mod_mpm_event or mod_mpm_prefork (Linux and macOS)

      On most Linux distributions, httpd can be installed via the system
      package manager:

          # Debian/Ubuntu
          sudo apt install apache2

          # RHEL/Fedora
          sudo dnf install httpd

      On macOS, httpd is included with the system or can be installed via
      Homebrew:

          brew install httpd

   2. Configuration

      If the httpd binary is on the system PATH, the tests will find it
      automatically. If httpd is installed in a non-standard location, set
      the "test.httpd.path" property in your build.properties file to point
      to the httpd binary:

          test.httpd.path=/usr/sbin/httpd

   3. Running the tests
      Integration tests are excluded from the default test run. To run
      them, use the integration test profile:

          ant test -Dtest.profile=integration

      The httpd integration tests are located in:

          test/org/apache/tomcat/integration/httpd/

   4. How the tests work

      Each test starts an httpd instance in foreground mode (-X) with a
      generated configuration that proxies requests to a Tomcat instance
      managed by the test framework. A file lock (httpd-binary.lock) is
      used to serialize test classes so that only one httpd instance runs
      at a time.

      The base class (HttpdIntegrationBaseTest) handles platform-specific
      httpd module loading automatically. Test subclasses only need to
      provide the test-specific httpd directives (proxy rules, extra
      modules, etc.).


(8) Source code checks

(8.1) Checkstyle

NOTE: Checkstyle is licensed under LGPL. Using Checkstyle during Tomcat
      build is optional and is off by default.

      See http://checkstyle.sourceforge.net/ for more information.

Tomcat comes with a Checkstyle configuration that tests its source code
for certain conventions, like presence of the license header.

To enable Checkstyle, add the following property to build.properties file:

    execute.validate=true

Once Checkstyle is enabled, the check will be performed automatically
during the build. The check is run before compilation of the source code.

To speed-up repeated runs of this check, a cache is configured. The cache
is located in the following directory:

    output/res/checkstyle

It is possible to run the check separately by calling the "validate"
target. The command is:

    cd ${tomcat.source}
    ant -Dexecute.validate=true validate


(8.2) SpotBugs

NOTE: SpotBugs is licensed under LGPL. Using SpotBugs during Tomcat build is
      optional and is off by default.

      See https://spotbugs.github.io/ for more information.

To enable SpotBugs, add the following property to build.properties file:

    execute.spotbugs=true

To compile Tomcat classes and generate a SpotBugs report, call the
"spotbugs" target. For example:

    cd ${tomcat.source}
    ant -Dexecute.spotbugs=true spotbugs

The report file by default is written to

    output/spotbugs


(8.3) End-of-line conventions check

You usually would not need to run this check. You can skip this section.

Apache Tomcat project has convention that all of its textual source files,
stored in the Git repository, use Unix style LF line endings.

This test is used by developers to check that the source code adheres to
this convention. It verifies that the ends of lines in textual files are
appropriate. The idea is to run this check regularly and notify developers
when an inconsistency is detected.

The command to run this test is:

    cd ${tomcat.source}
    ant validate-eoln
